If it’s time to renovate the paintings outside the house, know that far more than certain colors can determine the success of this task. Many people forget that in addition to choosing colors that appreciate the architectural design of the house, need to pay attention to small details.
To start painting, it is necessary to wait for the driest period of the year, so that unexpected rain does not damage the service. Ideally, wait for autumn to begin. In addition, it is necessary to clean and standardize walls. Every repair must also be done before the new paint.
If you plan to change the color of the exterior area of ??your home, pay attention to the following tips and start dreaming of a new facade. Remember, the outside area is your home business card.
Check everything that will be painted outside. Some houses have many details, such as wooden or iron frames. Look closely at the details and determine what type of paint will be needed. Don’t be fooled into thinking that one type of paint is only enough for the whole place. If you insist on this “economy”, you will soon realize that cheap prices are expensive.
After you have determined these details, choosing paint for the wall also requires attention and a little research. Both acrylic paint and rubber exterior paint require a slightly different preparation. So before you think about color choices, make sure about the needs and characteristics of your home. There are paints for various uses, such as those that are resistant to mold or salt sprays. Different finishes also offer various options, such as matte, glossy and satin finish. All of these options also have values. The more specific and the different, the higher the value.
To prepare the wall, it must be clean and dry. Ideally remove stains from all types and leave the entire surface even without gaps or curves. It is possible to wash the walls and in the dirtiest places using metal brushes and soap. However, saving water is very important. Only use this option if absolutely necessary.
After pre-cleaning, sand imperfections and remove old paint so that the new one has more adhesion. If old paint is inflated and peeled, it is important to remove all damaged areas before starting the service. In some cases, even need to use an electric remover. However, it is better to consult a professional because each case is a case.
Once you make sure the walls are clean and smooth, it’s time to start. Primer is a product that will be applied to all surfaces that will receive new paint. For each type of surface, there are certain types of primers. You should review the ingredients that make up the front of your house and buy a primer that is suitable for this use.
Primers have the main purpose of preparing the basis for ink reception. Without it, paint can show stains or eventually peel in a short time. In the case of metals and wood, the primer will prevent, in addition to peeling, rust and cracking.
If your goal is to completely change the exterior wall color, it’s a good idea to invest in the primary color with the coloring next to the selected paint. This will reduce the number of coats that will be applied. There are also primers that act to reduce mold, moisture, and even be able to isolate temperature.